Y anchor - the ultimate motorcycle security ground anchor
The roc multi offers the ultimate in Padlock Protection for Hasps, Chain and Padlocks, steel gate security and shipping container security
The roc multi is manufactured from 5mm thick wall box section and all joints are fully seam welded for maximum security. Paired with our weld on fixings it can offer excellent security to Shipping Containers, Work Cabins, Industrial Unit Sliding/Folding doors and Security Steel Gates. With our Heavy-Duty bolt on hasps the roc multi can greatly increase wooden shed security. The roc multi can be fitted to left or right hand opening shipping container doors or gates. Unlike other shipping container lock boxes, the roc multi (without protection plates) can fit shipping containers with locking bars that are close together at the door opening. The top and side slots are to protect padlocks from attacks when used with security chains up to 30mm.
The roc multi protects padlocks from lock picking and bolt cropping attacks. For use with security chains and padlocks, hasps and staples, shipping containers and steel gates etc.
To pick any padlock one hand is needed to operate the tension wrench and one hand to work the pick. The roc multi is designed so that only one hand can gain access to the padlock making it virtually impossible to pick the lock.
Most chains over 16mm are very hard, if not impossible to bolt crop by hand. However, if the chain is secured with a smaller diameter shackle padlock then the padlock becomes the weakest point. The roc multi simply shields the padlock from bolt cropper attacks.
The TOP PLATE has a 30mm wide access slit and is designed for the large chains where one link of the chain is fed through another link and only one link attaches to a Minimum 80mm in width CLOSED shackle padlock.
Padlocks smaller than 80mm in width can use either one of the side slots.
The FRONT & SIDE PLATES all have a 30mm wide access slot and are designed for chains that have two links attached to an OPEN shackle padlock. One end of the chain goes in one slit and the other end goes in either of the other two slits. Then the two links are locked along with the OPEN shackle padlock to the 10mm round bar that is welded to the inside of the roc multi. The 10mm bar is to stop smaller chains and lock being pulled out through the bottom opening and lock picked or cropped.
If the chain is large enough and can’t be pulled through to the bottom, the bar does not need to be used.
The roc multi inside measurement is 110mm wide and is best suited with bottom keyed padlocks. Front keyed padlocks can be more difficult to use with the roc multi, however smaller front keyed padlocks can be used as long as the padlock plus the key measure less than 90mm in total.
The roc multi can be used to protect padlocks attached to hasps found on anything from garden sheds to steel industrial gates. The BACK PLATE has various size and directional holes to accommodate most applications. The large 65mm x 55mm top hole (A) is designed for our own very popular security hasp - see SHED SECURITY PAGE. The two round holes (B) 30mm and 40mm are for small light duty hasps. The reason for the round hole is to ensure that torque can’t be applied to the hasp using the roc multi as a lever. We highly recommend that the hasp should be bolted and not screwed into position. The Horizontal (C) and Vertical (D) 70mm x 15mm slits are for heavy duty size hasps found on steel gates and industrial units etc.
The roc multi together with our Heavy Duty Shed Hasp offers the ultimate in shed security Excellent Security for Motorcycle Sheds (Very Popular) 5mm x 50mm Hasp. Doubles to 10mm at padlock shackle housing. Most other security hasps on the market are only 3mm in thickness. Also see our shed hinge security upgrade kits.
The roc multi can be used to secure shipping / storage containers and steel gates by using our weld on fixings.
Ultimate shipping container security.
Fits Left or Right-Hand Opening Doors.
360 Degree Angle Grinder Protection.
Padlock Cropping Protection.
Lock Picking Protection. Unlike some box types that leave the padlock key hole exposed.
When the shipping container protection plates and hasp fittings are welded on to both doors of the container and the roc multi is in place the protection plates totally surround the roc multi and offer a 360 degree shield against angle grinder attacks.
See bottom of page for Fitting Instructions.
Shipping Container with weld on protection plates.
Works cabin with weld on protection plates.
Industrial unit folding and sliding door security with weld on protection plates.
For containers with locking bars that are close together the roc multi will fit in between as long as the gap is larger than 130mm. There is no need for protection plates, the shipping container locking bars themselves stop angle grinder attacks.
The roc multi is for UK DELIVERY ONLY
Delivery 2 to 3 working days.
MULTIPLE ORDERS email your requirements with contact tel number to email@example.com and we will send you a no obligation PayPal invoice, for trade orders a bank transfer order can be issued if preferred .
COMBINED ORDERS such as anchors plus security hasps or alarms see SHED SECURITY email your requirements with contact tel number to firstname.lastname@example.org and we will send you a no obligation PayPal invoice.
COMMERCIAL ENQUIRIES email: email@example.com Tel: ( INT +44) 0191 2159738 / 07540465886 Please state preferred method of payment - PayPal invoice, Bank Transfer / Cheque invoice (PDF)
PLEASE DON'T HESITATE TO TELEPHONE OR EMAIL IF YOU HAVE ANY QUERIES. Tel: INT +44 0191 2159738 / 07540465886 firstname.lastname@example.org
BUY NOW BUTTONS (UK ONLY)
The PayPal buttons below are for United Kingdom orders ONLY
Follow the simple step by step instructions. You can make a secure Paypal or debit/credit card payment even if you do not have an account with PayPal.
Help speed up your order, after payment transaction is complete please email email@example.com with confirmation of - Delivery Address & Telephone No
£39.99 P&P £12.99
PLEASE USE THE BUTTON BELOW.
roc multi with Weld on Shipping Container Hasp.
£57.50 P&P £12.99
PLEASE USE THE BUTTON BELOW.
roc multi with Weld on Container Hasp and Protection Plates.
£79.99 P&P £12.99
PLEASE USE THE BUTTON BELOW.