SUPERIOR BAIT BOARDS
Our superior quality boat bait boards are attached with four marine grade 316 fixing bolts washers and nuts to two marine grade 316 stainless steel fixing bars welded to very strong industrial rail clamps, giving a extremely strong and sturdy work surface that will not twist turn or wobble or break when in use unlike some boards with lightweight plastic fixings.
BAIT BOARDS
With the choice of two sizes of rail clamps 22mm and 25mm Diameter
(other sizes can be made on request for an extra £10.00) email k9benson@btinternet.com
These DURABLE moulded-(no jointed back & sides) trays are available as two types
Type 1: Large with removable tray. Length: 61cm Width: 55cm Height: 20cm
Type 2: a slightly smaller single layer tray. Length:58cm Width:45cm Height:12cm
Both types are manufactured from a strong plastic- Polypropylene (PP), wikipedia "Polypropylene has good resistance to fatigue", more details on PP can seen here https://en.wikipedia.org/wiki/Polypropylene
Both types have two Stainless Steel split ring on the back to attach lanyards, to ensure your expensive knives, split ring pliers etc. will not go overboard (for those fast travelling choppy days out!)
Both have drainage holes to help keep your work surface clean and for easy wash down.
VARY-CHUM
Step up your boat fishing game and out fish others.
When the sea has poor visibility and lures don’t work and bait fishing at anchor is better, bring the fish to your hooks buy chumming the water with fish attractants released into the tide using our VARY-CHUM Tube
If you chum the fish will come!
LARGE durable tray with removable top shelf
Length: 61cm Width: 55cm Height: 20cm
SMALLER single tray = Length:58cm Width:45cm Height:12cm
Polypropylene (PP), wikipedia "Polypropylene has good resistance to fatigue", more details on PP can seen here https://en.wikipedia.org/wiki/Polypropylene
Both types of boards are attached with four marine grade 316 fixing bolts washers and nuts to two marine grade 316 stainless steel fixing bars welded to very strong industrial rail clamps, giving a extremely strong and sturdy work surface that will not twist turn or wobble or break when in use unlike some boards with lightweight plastic fixings.
Please measure your boat rail diameter and choose the correct size clamp Choice of two sizes of rail clamps 22mm and 25mm Diameter
(other sizes can be made on request for an extra £10.00)
email k9benson@btinternet.com
Board Type 1 with 22mm clamps £90.00 (£6.99 shipping)
Board Type 1 with 25mm clamps £90.00 (£6.99 shipping)
Board Type 2 with 22mm clamps £85.00 (£6.99 shipping)
Board Type 2 with 25mm clamps £85.00 (£6.99 shipping)
Please note the Paypal buttons below are for UK sales only.
PLEASE DON'T HESITATE TO TELEPHONE OR EMAIL IF YOU HAVE ANY QUERIES.
Tel: INT +44 0191 2159738 / 07540465886
email: k9benson@btinternet.com
.
Bring the fish to your hooks buy chumming the water with fish attractants released into the tide using our VARY-CHUM Tube.
NO MESS, NO FUSS, VARIABLE FLOW,
DURABLE CONSTRUCTION.
Dimensions: L 600mm x D 110mm
VARY-CHUM is so called as chum flow can varied by moving its internal blanking tube.
The blanking tube insert can be moved to uncover or cover the different size holes to adjust the chum flow, great for different coarse or finely chopped – minced chum baits.
When all of the small 8mm holes are exposed, the chum flow is slow.
For a medium chum flow the blanking tube is set half way.
When all of the large 13mm holes are exposed, the chum flow is very fast.
For the maximum release of chum the Internal blanking tube can be removed, this is a little fiddly and is not often used but can be an option if a large quantity of chum is regularly available.
To remove the internal blanking tube two of the eye bolts can be temporarily removed allowing the plastic threaded cap insert to be pulled out of the main tube. Once the internal blanking tube is removed the threaded cap insert and eye bolts can be replaced.
The VARY-CHUM has access caps and attachment points at both ends.
The end with the exposed flow holes go to the bottom as chum mix usually falls to the bottom (depending on its density and frozen state)
The VARY-CHUM can be flipped over so the
area of exposed flow holes are at the top so the chum flow can be reduced even more.
Chum can be made up to your favorite recipe using a mixture of minced or finely chopped oily fish such as Mackerel, Herrings and Pilchards mixed with fish oil, cooking oil and oats added to bind to a firm consistency, also the oats help disperse the fish oil attractants into the tidal flow. Any leftover bait can be added like Muscle, Crab, Worm, Prawn and Squid etc. Also, fish attractants can be added, these are readily available on ebay. Some people even add Tinned Dog or Cat food.
For different chum making methods and recipes check out you tube.
Once the chum is mixed well it can be decanted into disposable paper cups or reusable plastic food containers and frozen ready for your next fishing trip. This method makes life easier and a lot cleaner when reloading the chum tube on your boat. Simply pop the frozen chum out from the cup or container and pop them into the tube, a few can be added or one at a time for a slower disperse rate.
Disposable paper cups are readily available in 12oz capacity size = 9cm Diameter 11mm Height,
Search ebay - 12oz Single Wall White Paper Hot Tall Coffee Cups.
If you want to use round reusable plastic food containers the max diameter should not exceed 9cm
Search ebay Plastic Storage Buckets with Lids 0.5, 1, 5, 10, 15, 25/30 Litre Container Tubs
Some people attach chum tubes to the anchor chain.
This method can cause the chum flow to miss the target area.
Some attach a rope to the top of the chum tube then lower the tube to the sea bed, to avoid snags raise the tube back up a meter or two and tie it off at the bow or at the mid-ships cleat.
This method is better for two reasons:
1, the tube follows the boat as it moves to port and starboard with the wind and the chum flow trail always staying with the boat, bringing the fish to your hooks.
2, you can check the chum tube easily and refill if necessary, without having to lift and reset the anchor.
A 1M or 2M length of 60lb to 80lb fishing line is attached to the bottom of the tube with weights attached. The stronger the tide the more weight is needed to keep the rope vertical.
Also the VARY-CHUM can be hung off the side of a boat on the surface of the water while fishing for Sharks and other fish that swim in the upper water column.
PLEASE NOTE:
ROPE - LINE AND WEIGHTS NOT INCLUDED.
SOLD OUT!
NEW STOCK AVAILABLE SOON,
PLEASE CALL OR EMAIL
TO PRE ORDER YOUR VARY-CHUM.
Tel: INT +44 0191 2159738 / 07540465886
Email: k9benson@btinternet.com
UK £59.99 plus £6.99 P&P
UK DELIVERY 2 to 3 working days.
For international deliveries check out our ebay Global Shipping listings.
Y anchor Security Products | eBay Stores
PLEASE DON'T HESITATE TO TELEPHONE OR EMAIL IF YOU HAVE ANY QUERIES.
Visit our Facebook Group: BOAT & SHORE SEA FISHING UK
https://www.facebook.com/groups/704227891858402
Copyright © 2018 Y anchor - All Rights Reserved.
Powered by GoDaddy