SECURITY BRACKETS
HEAVY DUTY Security Anchor Brackets
Secure your garden furniture - Bench seats, Summerhouses, Arbours, Swing sets, Gazebos etc with these HEAVY DUTY Security Ground Anchors
Manufactured from 5mm steel, unlike others on the market that are only 2 or 3mm.
Available with Security Clutch head one-way wood screws, Coach Bolt & Shear Nut fasteners, HARD and SOFT ground fixings.
NOTE
Please read options carefully. when you have chosen the correct option for your application use the Paypal button BELOW your choice (1 Kit)
MULTIPLE ORDERS email your requirements with contact tel number to k9benson@btinternet.com and we will send you a no obligation PayPal invoice, for trade orders a bank transfer order can be issued if preferred .
COMBINED ORDERS such as Y anchors, security hasps or alarms email your requirements with contact tel number to k9benson@btinternet.com and we will send you a no obligation PayPal invoice.
HARD GROUND FIXINGS
These HARD GROUND security fixings kits below come with very stong M10 Security Anchor Expansion Bolts once they are tightened the steel ball insert is hammered into the allen key hole and cannot be removed. Ideal security against theft for expensive garden furiture- Bench seats etc
SCREW KIT - HARD GROUND FIXINGS
KIT CONTENTS
2 x 50mm X 5mm HEAVY DUTY SECURITY BRACKETS.
2 x BUTTON HEAD M10 Ground Anchor Security Expansion Bolts.
2 x Security Ball Bearing Inserts.
Hammer into Allen key hex hole.
1x Allen Key.
4 x Security Clutch head one-way wood screws only operate in a clockwise motion using a standard screwdriver. Anti-clockwise is prohibited due to the shape of the drive feature. No specialist tools required for this security fastener, just use a standard slotted screwdriver.
£32.99 P&P £4.50
BOLT KIT - HARD GROUND FIXINGS
KIT CONTENTS
2 x 50mm X 5mm HEAVY DUTY SECURITY BRACKETS.
2 x BUTTON HEAD M10 Ground Anchor Security Expansion Bolts.
2 x Security Ball Bearing Inserts.
Hammer into Allen key hex hole.
1x Allen Key.
4 x 150mm Coach Bolts with 4 x Security Shear head Nuts Security shear nuts - the hexagonal section shears off when the required torque is applied, leaving behind only the tamper resistant cone section which is virtually impossible to remove.
£32.99 P&P £4.50
SOFT GROUND FIXING
Below these SOFT GROUND security fixings come with either HAMMER IN pegs or CONCRETE IN. Available with Security Clutch head one-way wood screws, Coach Bolt & Shear Nut fasteners. Ideal for Bench Seats, Swing sets, Sheds, Summerhouses, Gazebos, Arbours etc .
HAMMER IN
For best results they should be hammered in at an angle.
CONCRETE IN
A stronger anchorage, for high risk and high wind areas.
SCREW KIT - SOFT GROUND FIXINGS
KIT CONTENTS
2 x 50mm X 5mm HEAVY DUTY SECURITY BRACKETS.
2x Steel hammer in pegs with plastic end caps.
4 x Security Clutch head one-way wood screws
only operate in a clockwise motion using a standard screwdriver. Anti-clockwise is prohibited due to the shape of the drive feature. No specialist tools required for this security fastener, just use a standard slotted screwdriver.
£32.99 P&P £4.50
BOLT KIT - SOFT GROUND FIXINGS
KIT CONTENTS
2 x 50mm X 5mm HEAVY DUTY SECURITY BRACKETS.
2 x Steel hammer in pegs with plastic end caps.
4 x 150mm Coach Bolts with 4 x Security Shear head Nuts Security shear nuts - the hexagonal section shears off when the required torque is applied, leaving behind only the tamper resistant cone section which is virtually impossible to remove.
£32.99 P&P £4.50
CONCRETE-IN
SCREW KIT - CONCRETE IN
KIT CONTENTS
2 x 50mm X 5mm HEAVY DUTY SECURITY BRACKETS. Drilled and welded round bar (10mm diameter x 250mm long with 100mm anchorage).
4 x Security Clutch head one-way wood screws only operate in a clockwise motion using a standard screwdriver. Anti-clockwise is prohibited due to the shape of the drive feature. No specialist tools required for this security fastener, just use a standard slotted screwdriver.
£35.50 P&P £4.50
BOLT KIT - CONCRETE IN
KIT CONTENTS
2 x 50mm X 5mm HEAVY DUTY SECURITY BRACKETS. Drilled and welded round bar (10mm diameter x 250mm long with 100mm anchorage).
4 x 150mm Coach Bolts with 4 x Security Shear head Nuts Security shear nuts - the hexagonal section shears off when the required torque is applied, leaving behind only the tamper resistant cone section which is virtually impossible to remove.
£35.50 P&P £4.50